NHRA shoulder belt mounting, wrap around okay

Print Thread

Re: NHRA shoulder belt mounting, wrap around okay [Re: J_BODY] #1820961 05/07/15 11:42 AM 05/07/15 11:42 AM
Joined: May 2010 Posts: 485 Central California MoParFish mopar
MoParFish mopar Joined: May 2010 Posts: 485 Central California	Originally Posted By J_BODY Need something to keep belts from sliding. Most have a metal "hoop" welded on the bar for that purpose. Yep, before I welded the hoops on back of the bar, the belts would slide off my shoulders. A tech once told me I could use two hose clamps on the back bar to position straps but there are cleaner ways. Also, I run the strap opposite yours so the loose end of strap comes out underneath the buckle and drops to the floor behind the seat 20140317_190106.jpg (288 downloads) Sworn Member Central Valley MoPar Drag Pack. You can reach me at (done-et-chasing@going-rounds.gone)... :-) [img]https://s6.postimg.org/v3mbggksx/SAC16.jpg[/img]image hosting more than 5mb

Entire Thread
Subject	Posted By	Posted
NHRA shoulder belt mounting, wrap around okay	sawdust	05/07/15 04:02 AM
Re: NHRA shoulder belt mounting, wrap around okay	MR_P_BODY	05/07/15 04:07 AM
Re: NHRA shoulder belt mounting, wrap around okay	J_BODY	05/07/15 06:04 AM
Re: NHRA shoulder belt mounting, wrap around okay	MoParFish	05/07/15 03:42 PM
Re: NHRA shoulder belt mounting, wrap around okay	J_BODY	05/07/15 06:06 AM
Re: NHRA shoulder belt mounting, wrap around okay	J_BODY	05/07/15 03:47 PM
Re: NHRA shoulder belt mounting, wrap around okay	BradH	05/08/15 06:24 PM

Hop To