440 rods,low cost but good ones - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech 440 rods,low cost but good ones

Print Thread

Re: 440 rods,low cost but good ones [Re: 440sourcedotcom] #1814673 04/29/15 05:23 PM 04/29/15 05:23 PM
Joined: Jan 2003 Posts: 15,439 Val-haul-ass... eventually B BradH Taking time off to work on my car
BradH Taking time off to work on my car B Joined: Jan 2003 Posts: 15,439 Val-haul-ass... eventually	Not directed at ANYONE, but just pointing out that "cheap" rods only stay "cheap" when they don't cost you additional $$$ to have them corrected for poor quality control during machining.

Entire Thread
Subject	Posted By	Posted
440 rods,low cost but good ones	moparborn	04/28/15 03:08 AM
Re: 440 rods,low cost but good ones	Cab_Burge	04/28/15 05:36 AM
Re: 440 rods,low cost but good ones	littleVAL	04/29/15 04:52 AM
Re: 440 rods,low cost but good ones	440sourcedotcom	04/29/15 07:39 PM
Re: 440 rods,low cost but good ones	BradH	04/29/15 09:23 PM
Re: 440 rods,low cost but good ones	an8sec70cuda	04/29/15 09:30 PM
Re: 440 rods,low cost but good ones	Twostick	04/30/15 07:44 AM
Re: 440 rods,low cost but good ones	BradH	04/30/15 05:20 PM
Re: 440 rods,low cost but good ones	Twostick	04/30/15 06:06 PM
Re: 440 rods,low cost but good ones	Alchemi	04/30/15 06:59 AM
Re: 440 rods,low cost but good ones	J_BODY	04/29/15 11:27 PM
Re: 440 rods,low cost but good ones	Randy..	04/30/15 12:01 AM
Re: 440 rods,low cost but good ones	BradH	04/30/15 07:14 AM
Re: 440 rods,low cost but good ones	GTX MATT	04/30/15 03:25 AM
Re: 440 rods,low cost but good ones	moparborn	04/30/15 03:33 AM
Re: 440 rods,low cost but good ones	an8sec70cuda	04/30/15 06:24 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1