On my 727 trans, I have trans fluid that seeps out the threads of the front band adjuster. It seeps out the threads and thru the adjuster nut, then runs down the case.

I want to put some liquid Teflon tape on the threads. I don't remember if anything will fall out of place, if I pull the adjuster out of the case to spray it clean. So that I can put some liquid Teflon tape on the threads.

I am going to be doing this tomorrow morning. I have to pull the seat , shifter and part of the aluminum floor to get at it.

Any insight would be helpful.

Thanks...


548 cu. in., Bill Mitchell Aluminum Block, CRT 727 auto trans, Alston Chassis. 8.981et at 149.46 mph. 1.204et - 60 foot, So Far....