6.4 hemi head CNC program done

Print Thread

Re: 6.4 hemi head CNC program done [Re: pittsburghracer] #1789674 03/30/15 01:16 PM 03/30/15 01:16 PM
Joined: Jun 2007 Posts: 251 SD USA neonic enthusiast
neonic enthusiast Joined: Jun 2007 Posts: 251 SD USA	I looked at these in INDY KG engines had them. Said they were doing the CNC mapping for them. Nice pieces. Looks like the next step would be to change the rocker stands so we can get better valve geometry for larger lift cams.

Entire Thread
Subject	Posted By	Posted
6.4 hemi head CNC program done	W5DART66	03/28/15 01:59 AM
Re: 6.4 hemi head CNC program done	SC304	03/28/15 02:20 AM
Re: 6.4 hemi head CNC program done	slammedR/T	03/28/15 02:49 AM
Re: 6.4 hemi head CNC program done	72Swinger	03/28/15 06:15 AM
Re: 6.4 hemi head CNC program done	Dustedu	03/29/15 03:19 PM
Re: 6.4 hemi head CNC program done	HardcoreB	03/29/15 03:23 PM
Re: 6.4 hemi head CNC program done	sixpackgut	03/30/15 11:07 PM
Re: 6.4 hemi head CNC program done	Just-a-dart	03/31/15 12:35 AM
Re: 6.4 hemi head CNC program done	J_BODY	03/28/15 06:53 AM
Re: 6.4 hemi head CNC program done	1967dartgt	03/28/15 05:53 PM
Re: 6.4 hemi head CNC program done	SpareParts	03/28/15 11:57 PM
Re: 6.4 hemi head CNC program done	jim sciortino	03/29/15 01:40 AM
Re: 6.4 hemi head CNC program done	fishy340	03/31/15 01:42 AM
Re: 6.4 hemi head CNC program done	Cuda367	03/30/15 04:40 AM
Re: 6.4 hemi head CNC program done	1967dartgt	03/30/15 04:13 PM
Re: 6.4 hemi head CNC program done	polyspheric	03/30/15 04:23 PM
Re: 6.4 hemi head CNC program done	pittsburghracer	03/30/15 04:28 PM
Re: 6.4 hemi head CNC program done	neonic	03/30/15 05:16 PM
Re: 6.4 hemi head CNC program done	W5DART66	03/30/15 05:29 PM
Re: 6.4 hemi head CNC program done	Jerry	03/30/15 06:24 PM
Re: 6.4 hemi head CNC program done	sixpackgut	03/30/15 07:12 PM
Re: 6.4 hemi head CNC program done	WHITEDART	03/30/15 10:34 PM
Re: 6.4 hemi head CNC program done	Just-a-dart	03/30/15 11:50 PM
Re: 6.4 hemi head CNC program done	SRT6776	03/30/15 10:12 PM
Re: 6.4 hemi head CNC program done	MOPAR MADNESS	04/11/15 04:37 AM
Re: 6.4 hemi head CNC program done	mshred	04/11/15 02:27 PM
Re: 6.4 hemi head CNC program done	Randy..	04/12/15 03:32 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To