6.4 hemi head CNC program done

Print Thread

Re: 6.4 hemi head CNC program done [Re: polyspheric] #1789673 03/30/15 12:28 PM 03/30/15 12:28 PM
Joined: Feb 2005 Posts: 20,198 PA. pittsburghracer "Little"John
pittsburghracer "Little"John Joined: Feb 2005 Posts: 20,198 PA.	Quote: These just came off cnc machine you mean except for the polishing.... Keep throwing stones guys and we will be reading about purple shaft cams, super stock springs, and pinion angles. Very nice job on the heads Brett. THANKS for taking the time to post. 1970 Duster Edelbrock headed 408 5.984@112.52 422 Indy headed small block 5.982@112.56 mph 9.42@138.27 Livin and lovin life one day at a time

Entire Thread
Subject	Posted By	Posted
6.4 hemi head CNC program done	W5DART66	03/28/15 01:59 AM
Re: 6.4 hemi head CNC program done	SC304	03/28/15 02:20 AM
Re: 6.4 hemi head CNC program done	slammedR/T	03/28/15 02:49 AM
Re: 6.4 hemi head CNC program done	72Swinger	03/28/15 06:15 AM
Re: 6.4 hemi head CNC program done	Dustedu	03/29/15 03:19 PM
Re: 6.4 hemi head CNC program done	HardcoreB	03/29/15 03:23 PM
Re: 6.4 hemi head CNC program done	sixpackgut	03/30/15 11:07 PM
Re: 6.4 hemi head CNC program done	Just-a-dart	03/31/15 12:35 AM
Re: 6.4 hemi head CNC program done	J_BODY	03/28/15 06:53 AM
Re: 6.4 hemi head CNC program done	1967dartgt	03/28/15 05:53 PM
Re: 6.4 hemi head CNC program done	SpareParts	03/28/15 11:57 PM
Re: 6.4 hemi head CNC program done	jim sciortino	03/29/15 01:40 AM
Re: 6.4 hemi head CNC program done	fishy340	03/31/15 01:42 AM
Re: 6.4 hemi head CNC program done	Cuda367	03/30/15 04:40 AM
Re: 6.4 hemi head CNC program done	1967dartgt	03/30/15 04:13 PM
Re: 6.4 hemi head CNC program done	polyspheric	03/30/15 04:23 PM
Re: 6.4 hemi head CNC program done	pittsburghracer	03/30/15 04:28 PM
Re: 6.4 hemi head CNC program done	neonic	03/30/15 05:16 PM
Re: 6.4 hemi head CNC program done	W5DART66	03/30/15 05:29 PM
Re: 6.4 hemi head CNC program done	Jerry	03/30/15 06:24 PM
Re: 6.4 hemi head CNC program done	sixpackgut	03/30/15 07:12 PM
Re: 6.4 hemi head CNC program done	WHITEDART	03/30/15 10:34 PM
Re: 6.4 hemi head CNC program done	Just-a-dart	03/30/15 11:50 PM
Re: 6.4 hemi head CNC program done	SRT6776	03/30/15 10:12 PM
Re: 6.4 hemi head CNC program done	MOPAR MADNESS	04/11/15 04:37 AM
Re: 6.4 hemi head CNC program done	mshred	04/11/15 02:27 PM
Re: 6.4 hemi head CNC program done	Randy..	04/12/15 03:32 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To