Quote:

2x2 .125 angle

2x2 .125 square tube

2 bolts/nuts

Drill 6 holes

[image]http://img.photobucket.com/albums/v655/crackedback/70%20Dart%20340%20EK2/Engineinstall.jpg[/i




I had to lift the engine and car with this set up because of the engine/car angle wouldn't allow it to settle at K frame. Long bolts run in, picked up, more blocks under pan. No problems at all.




This is a nice install.Inexpensive and easy to make.Good job.