I have a 3.73 gear set for a Dana 60 and I also have a Dana 60-2 that is narrowed to fit my D100 and also fits an A-body (same width). If it were my car I would go Dana and skip right past the 8.75"

The Dana 60-2 is going in my truck with 4.10 gears, a PowerLock carrier, 35 spline stock axles
and 34" diameter 305/75R16 tires. Should be a nice upgrade

The wheel/tire in the picture is a 245/75R16 and only 30" in diameter, so the tire width will go from 9.5" to 12". This is of course to improve the towing capacity of the truck...that is what I tell my wife anyway

8460986-100_3233.JPG (61 downloads)
Last edited by Polarapete; 03/15/15 04:38 PM.

1986 Dodge Ramcharger 440 2wd, Bracket Racer Under Construction
1998 Ram 2500 QuadCab, new daily driver.
2008 Honda Element
2014 Carry-On 7x14 Cargo Trailer