Quote:

it doesnt work very good....

CAR: Plymouth RoadRunner 2 Door Pillar Coupe
ENGINE: 426cid Hemi 2x4-bbl HP V8
TRANSMISSION: 3-Speed Automatic
TIRES: F70x15 Red Side Wall, nylon belted
BUILD DATE: September 12.
AXLE: Unknown Axle Code
INTERIOR: Gold Interior.
PAINT:
OTHER:

MOLDINGS:
15: Unknown Option
20: Unknown Option
44: Unknown Option
58: Unknown Option
720: Unknown Option
84: Unknown Option

ABC OPTIONS:
Z1: Unknown Option

abc OPTIONS:
q6: Unknown Option



Well it worked on my RT but I could get it to work on your's either.

I'll fill in what I think I knew,

The 48 under axle code is 4=3.23 8=sure grip

The paint is I believe bronze metalic/root beer/ FK5 like - MM1

The upper door frames are gold - the Y under the U

The 164855 is the sequence number and should be on the core support and the driver trunk rail, not sure about the cowl on 68s

m6 shows to be driver's outside mirro
A1 shows to be a 26 inch radiator

I think it's an alignment thing, I did better than you but I will work on it some more.

CAR: Plymouth RoadRunner 2 Door Pillar Coupe
ENGINE: 426cid Hemi 2x4-bbl HP V8
TRANSMISSION: 3-Speed Automatic
TIRES: F70x15 Red Side Wall, nylon belted
BUILD DATE: September 12.
AXLE: 3.23 Rear Axle Ratio, Sure Grip
INTERIOR: Deluxe Trim Grade, Vinyl Split Bench Seats.
PAINT: Monotone Bronze Metallic Paint.
OTHER: Medium Tan Metallic Upper Door Frame Color.

MOLDINGS:
35: Unknown Option
40: Unknown Option

ABC OPTIONS:
A1: 26in Radiator
R1: AM Radio

abc OPTIONS:
m6: Driver's Outside Remote Operated Mirror

Careful, your character's showing!