I've got some Crane ductile rockers for a BB here that have galling in the bores, so I was going to bore them out and install bronze bushings (I've got a mini mill and lathe), does anyone have blueprint specs for them? The pads look good so I won't have to get them ground but the bores definitely need to be done. Looking for mainly the bore to shaft dimensions (clearance), but any would be appreciated. Also what kind of bushings would you go with? Initially I thought oil lite's, but they're probably not needed as its pressure fed. I was going to bore them out .060" ish, bush them, then ream/hone them to size (I know bronze it's tricky to ream)