Quote:

You do realize that on low beam there are only the 2 outside sealed beams that come on. The inner 2 sealed beams only have one element and it is wired to the high beam side.




To clarify the "low beam" headlights have both low and high beam filaments in them. Odds are your low beams are not coming on at all and you are seeing the highs in all four headlights.

I would look at your floor dimmer as that is where the switch is made and they do have a tendency to go bad being where the muck and wet is.


They say there are no such thing as a stupid question.
They say there is always the exception that proves the rule.
Don't be the exception.