Comp Cams pushrods bent out of the box???

Print Thread

Re: Comp Cams pushrods bent out of the box??? [Re: domingo] #1741667 01/29/15 02:42 PM 01/29/15 02:42 PM
Joined: Jan 2003 Posts: 5,895 Florida Locomotion master
Locomotion master Joined: Jan 2003 Posts: 5,895 Florida	Anything is possible. Double-check by rolling them on a piece of glsss or something similar, with the cup hanging off the edge. I got a Mopar Performance piston once that the wrist pin hole was machined about 20* off!

Entire Thread
Subject	Posted By	Posted
Comp Cams pushrods bent out of the box???	domingo	01/29/15 06:37 PM
Re: Comp Cams pushrods bent out of the box???	Locomotion	01/29/15 06:42 PM
Re: Comp Cams pushrods bent out of the box???	domingo	01/29/15 07:04 PM
Re: Comp Cams pushrods bent out of the box???	pittsburghracer	01/29/15 09:02 PM
Re: Comp Cams pushrods bent out of the box???	domingo	01/29/15 09:24 PM
Re: Comp Cams pushrods bent out of the box???	dogdays	01/29/15 09:26 PM
Re: Comp Cams pushrods bent out of the box???	mopowers	01/29/15 09:48 PM
Re: Comp Cams pushrods bent out of the box???	B3RE	01/29/15 10:06 PM
Re: Comp Cams pushrods bent out of the box???	JohnRR	01/29/15 10:42 PM
Re: Comp Cams pushrods bent out of the box???	domingo	01/29/15 11:51 PM
Re: Comp Cams pushrods bent out of the box???	Anonymous	01/30/15 12:24 AM
Re: Comp Cams pushrods bent out of the box???	domingo	01/30/15 12:52 AM
Re: Comp Cams pushrods bent out of the box???	CHAPPER	01/30/15 01:05 AM
Re: Comp Cams pushrods bent out of the box???	domingo	01/30/15 01:11 AM
Re: Comp Cams pushrods bent out of the box???	Locomotion	01/30/15 01:31 AM
Re: Comp Cams pushrods bent out of the box???	MR_P_BODY	01/30/15 01:35 AM
Re: Comp Cams pushrods bent out of the box???	domingo	01/30/15 01:37 AM
Re: Comp Cams pushrods bent out of the box???	sublimehemi	01/30/15 01:44 AM
Re: Comp Cams pushrods bent out of the box???	DAYTONA540	01/30/15 02:08 AM
Re: Comp Cams pushrods bent out of the box???	408Dust	01/30/15 06:35 AM
Re: Comp Cams pushrods bent out of the box???	Porter67	01/30/15 12:23 PM
Re: Comp Cams pushrods bent out of the box???	JohnRR	01/30/15 09:50 PM
Re: Comp Cams pushrods bent out of the box???	MR_P_BODY	01/30/15 10:35 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To