Pins stuck in new pistons... - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer Pins stuck in new pistons...

Print Thread

Re: Pins stuck in new pistons... [Re: TJP] #1724957 01/08/15 09:58 PM 01/08/15 09:58 PM
Joined: Jan 2003 Posts: 2,256 New York rarefish OP top fuel
rarefish OP top fuel Joined: Jan 2003 Posts: 2,256 New York	Well I put one of them in the oven at 250 deg for about 15 minutes and was able to push the pin out with gloves on. No rust found. Just a tight fit. Thanks everyone for the help.

Entire Thread
Subject	Posted By	Posted
Pins stuck in new pistons...	rarefish	01/08/15 07:44 PM
Re: Pins stuck in new pistons...	Golden-Arm	01/08/15 08:00 PM
Re: Pins stuck in new pistons...	rarefish	01/08/15 10:37 PM
Re: Pins stuck in new pistons...	fury4speed	01/08/15 10:51 PM
Re: Pins stuck in new pistons...	Anonymous	01/08/15 10:56 PM
Re: Pins stuck in new pistons...	TJP	01/09/15 12:35 AM
Re: Pins stuck in new pistons...	rarefish	01/09/15 01:58 AM
Re: Pins stuck in new pistons...	MLR426	01/08/15 08:01 PM
Re: Pins stuck in new pistons...	Cab_Burge	01/08/15 08:30 PM
Re: Pins stuck in new pistons...	yella71	01/09/15 01:59 AM
Re: Pins stuck in new pistons...	sogtx	01/09/15 03:20 AM
Re: Pins stuck in new pistons...	Cab_Burge	01/09/15 05:20 AM
Re: Pins stuck in new pistons...	MO_PA	01/09/15 05:59 PM
Re: Pins stuck in new pistons...	dogdays	01/09/15 07:17 PM
Re: Pins stuck in new pistons...	Cab_Burge	01/09/15 07:19 PM
Re: Pins stuck in new pistons...	sogtx	01/10/15 01:42 PM
Re: Pins stuck in new pistons...	jlatessa	01/10/15 05:05 PM
Re: Pins stuck in new pistons...	6PakBee	01/10/15 09:05 PM
Re: Pins stuck in new pistons...	jlatessa	01/10/15 10:32 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1