Yes Doug I see what you are talking about. To get Ackerman with front steer the tie-rod outer pivot needs to be outside the lower balljoint pivot. On rear-steer its inside. So I will probably end-up making custom steering arms like Jeff did. They are going to be kinda short compared to stock in order to get them outside the lower b-joint. Thanks for the heads-up.
Last edited by 6bblFLASH; 03/02/1509:09 PM.
70` Cuda`,440 6BBL Jerico,Dana 4.56 Still on 93 Pump Gas 9.87 @ 136/1.31-60ft.`09 Mopar Nationals PASSON PERFORMANCE "Stick-Shift" Champ! 2013 StickShift Challenge Winner@ Mopar Nationals!
