Quote:

Quote:

Quote:

being dual purpose

on the topic of a dana

what about 4.10 dana gear running with A-518
(because that's the gear in the White Dart now.
1350 joints)
have a 3.54 gear but would have to narrow a housing.

have a 518 (diesel) out of a pulling truck with good parts in it
5 pinion, hardened input shaft, billet drum, etc
could swap into the A-518??????

would the 3.54 be a better ratio ?
ET pros are 26" tall

Thanks

I know very little about setting up a turbo application
trying to learn.




The valve body in a diesel trans is all wrong for
a gas engine





Mike
was only going to rob the good parts> pinion gears, drums, input shaft since the case is cracked anyway, where it bolts to the adapter plate on the diesel
use the valve body and governor in the (Car)trans




Is the input shaft and pump for a 727 conv