Quote:

Quote:

being dual purpose

on the topic of a dana

what about 4.10 dana gear running with A-518
(because that's the gear in the White Dart now.
1350 joints)
have a 3.54 gear but would have to narrow a housing.

have a 518 (diesel) out of a pulling truck with good parts in it
5 pinion, hardened input shaft, billet drum, etc
could swap into the A-518??????

would the 3.54 be a better ratio ?
ET pros are 26" tall

Thanks

I know very little about setting up a turbo application
trying to learn.



The valve body in a diesel trans is all wrong for
a gas engine




Mike
was only going to rob the good parts> pinion gears, drums, input shaft since the case is cracked anyway, where it bolts to the adapter plate on the diesel
use the valve body and governor in the (Car)trans

Ha-Ha Racin
Havin Fun 101

Howard

68 "Cummins" Satellite
70 W-2 449 "More Door" Dart
70 340 Dart Swinger, 4spd
71 360 Dart Swinger
72 540/ 518 Dart Swinger
73 airwolf 446/a-500 Cuda
73 "Cummins" Crew cab-car hauler
84 446 Dodge Rampage (tube chassis)
92 CTD 11' flat bed
92 CTD club cab
07 Dodge Caliber