I'm finally putting together an engine for my barracuda or to possibly sell the engine outright. It will be a street/strip 421" small block that should end up around 11.3 to 1 and run on pump premium. I have a couple of cams to choose from. (1) flat tappet 260 -264 @ .050 with .640" lift (2) solid roller 260 - 266 @.050 with .670" lift. Both have 108 LS. I have all of the additional parts to put either cam in it. For resale purposes, would you pay extra if it had a roller in it over the flat tappet?

Rod