Hi There,

Just wanting to share my solution for a really stuck oil filter - small block - PH8 - oops XG16 not that it matters.

Since access to the filter is really good with wheel and access panel removed in my 69 B - I came up with this...

Take a parts store good for nutin filter end cap wrench and modify it.

I drilled 4 holes through the back of the wrench. I used self taping screws to screw the wrench to the oil filter. Big A$$ breaker bar on extensions connected to the wrench and blamo...off she came no muss no fuss and no mess.....

Hope this helps someone.

Plaz