Quote:

Quote:

Quote:

Quote:

thanks, I also saw somewhere welding done on the LCA,s is this necessary?



Right here. Coil Over Conversion



Ok I missing the boat here ! if you weld them LCA like that pic..how do the control arms move up and down ??




The part you see welded is the adjuster that is no longer used once the torsion bar is eliminated. The weld just keeps what's left of the adjuster from moving around. I have whacked them off as close as possible then welded just for cosmetic purposes. Has nothing to do with the movement of the LCA.

Mike Gray




I think the confusion lies with the bolt and big washer that connects the LCA to the pivot pin. Once the adjuster is welded to the LCA and the pivot is bolted to both the LCA and the K-member it doesn't look like it should move.

It looks like Duster Dave used a nylon or teflon washer to allow the LCA to rotate up and down a little easier. It looks like that would free up some of the movement.