Quote:

Seems like a waste to run such a tiny cam and bore on a motor/ heads with a lot of potential.



The cam is not the limiting factor. I agree about the bore but the R3 we used was sonic checked and 4.070" is all there is fo0r future overb0ores. J.Rob

2009 PHR\EMC Competitor
2010 PHR\EMC Competitor
2011 PHR\EMC Competitor
2012 PHR\EMC Competitor
2013 PHR\EMC Competitor
2014 HotRod/EMC Competitor
2015 HotRod/EMC NoShow
2016 HotRod/EMC 3rd place SPEC Bigblock
2018 HotRod/EMC 7th place G3