R3 dry sump setup - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech R3 dry sump setup

Print Thread

Re: R3 dry sump setup [Re: cermac] #1688540 10/21/14 07:03 PM 10/21/14 07:03 PM
Joined: May 2010 Posts: 16 West Milton,Pa C cermac OP member
cermac OP member C Joined: May 2010 Posts: 16 West Milton,Pa	Was looking at Barnes pump,(used). Hardest part is pan. Can't find any used for 340 mains. Will by new but what manufacturer ? Do have a qualified fabricator if need repaired for some reason!

Entire Thread
Subject	Posted By	Posted
R3 dry sump setup	cermac	10/21/14 12:29 PM
Re: R3 dry sump setup	SpareParts	10/21/14 01:10 PM
Re: R3 dry sump setup	jcc	10/21/14 04:24 PM
Re: R3 dry sump setup	SpareParts	10/21/14 06:28 PM
Re: R3 dry sump setup	Al_Alguire	10/21/14 06:49 PM
Re: R3 dry sump setup	340_Dart	10/21/14 08:07 PM
Re: R3 dry sump setup	cermac	10/21/14 11:03 PM
Re: R3 dry sump setup	SpareParts	10/22/14 12:39 AM
Re: R3 dry sump setup	mafo	10/22/14 10:20 AM
Re: R3 dry sump setup	cermac	10/22/14 01:37 PM
Re: R3 dry sump setup	mafo	10/22/14 04:08 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1