Sealing the 383 intake manifold

Print Thread

Re: Sealing the 383 intake manifold [Re: Pynzo] #1686051 10/15/14 02:23 PM 10/15/14 02:23 PM
Joined: Feb 2012 Posts: 137 midwest - USA 6 69/70 Plymies OP member
69/70 Plymies OP member 6 Joined: Feb 2012 Posts: 137 midwest - USA	Just trying to get to the bottom of this question....Were the original 383 intake manifolds from the factory in 1970 with gasket/valley pan/gasket or just valley pan? I have seen both claims, which is correct? P.S. The shop wants me to mill the intake in order to get proper intake bolt alignment and use the paper gaskets along with the valley pan per AERA's and Hughes Engine's recommendations. Pynzo...10-4 on the use of the copper, matches the paint just like you say! Last edited by 69/70 Plymies; 10/15/14 02:27 PM.

Entire Thread
Subject	Posted By	Posted
Sealing the 383 intake manifold	69/70 Plymies	10/15/14 06:39 AM
Re: Sealing the 383 intake manifold	calrobb2000	10/15/14 06:49 AM
Re: Sealing the 383 intake manifold	69/70 Plymies	10/15/14 07:02 AM
Re: Sealing the 383 intake manifold	Pynzo	10/15/14 11:41 AM
Re: Sealing the 383 intake manifold	skicker	10/15/14 01:08 PM
Re: Sealing the 383 intake manifold	therocks	10/15/14 01:34 PM
Re: Sealing the 383 intake manifold	69/70 Plymies	10/15/14 02:28 PM
Re: Sealing the 383 intake manifold	skicker	10/15/14 02:57 PM
Re: Sealing the 383 intake manifold	JohnRR	10/15/14 07:47 PM
Re: Sealing the 383 intake manifold	Pynzo	10/15/14 04:06 PM
Re: Sealing the 383 intake manifold	69/70 Plymies	10/15/14 06:23 PM
Re: Sealing the 383 intake manifold	streetkit	10/15/14 06:45 PM
Re: Sealing the 383 intake manifold	stumpy	10/15/14 06:46 PM
Re: Sealing the 383 intake manifold	JohnRR	10/15/14 07:48 PM
Re: Sealing the 383 intake manifold	sthemi	10/15/14 10:40 PM
Re: Sealing the 383 intake manifold	MoparforLife	10/15/14 06:47 PM
Re: Sealing the 383 intake manifold	RapidRobert	10/15/14 11:18 PM

Hop To