You don't want to see how they kludged on a old Stefs on my 499 but I am replacing it with a Aerospace Components 3 vane that can be mounted to the motor plate.

That is as soon as I get the spot where it should be mounted put back on the motor plate. They have -12AN fittings and I think my old one was -8 with a seperator between the engine and the pump and a exit can after the pump. Gonna use -12 oring to -8 AN fittings to be able to use my old cans and hoses.

http://www.summitracing.com/parts/aar-ac-vp3-cm/overview/