Could I see some pics of your vacume pump mounting

Pics of mounting location and brackets for your vacume pump.
thanks

You don't want to see how they kludged on a old Stefs on my 499 but I am replacing it with a Aerospace Components 3 vane that can be mounted to the motor plate.

That is as soon as I get the spot where it should be mounted put back on the motor plate. They have -12AN fittings and I think my old one was -8 with a seperator between the engine and the pump and a exit can after the pump. Gonna use -12 oring to -8 AN fittings to be able to use my old cans and hoses.

http://www.summitracing.com/parts/aar-ac-vp3-cm/overview/

Mine is mounted on the pass side motor plate high up. couldn't come up with a good pic.

not good, but a picture!

Thanks Tom

Nice rides ya got there!

Mine is mounted directly to the motor plate using a Moroso pump and bracket.


Same thing when we had the Hemi in the car but we had the adjuster bracket on the frame rail. This is an Aerospace pump.

GZ mounted on the motor plate.
Doug

mine is mounted to the plate with spacer blocks. it could be better but it works so i'm running with it. 3 seasons, no problems.

Here..




Chris..

Moroso 3 vane

Another

better pic of mine

Quote:

---

GZ mounted on the motor plate.
Doug

---

Doug what is that can between the VC and the pump?
Thanks, Don