5/16 pushrods with solid roller

Print Thread

Re: 5/16 pushrods with solid roller [Re: Streetwize] #1616153 05/05/14 03:13 PM 05/05/14 03:13 PM
Joined: Apr 2009 Posts: 3,415 Toronto M mshred OP master
mshred OP master M Joined: Apr 2009 Posts: 3,415 Toronto	Quote: Manton makes a nice 11/32" pushrod. I am not sure even the 11/32 stuff would fit. The 5/16 is already very close to touching the lifter bore I have heard that too thick of a wall thickness on a small diameter pushrod can actually weaken the design...any truth to this?

Entire Thread
Subject	Posted By	Posted
5/16 pushrods with solid roller	mshred	05/05/14 05:08 AM
Re: 5/16 pushrods with solid roller	skrews	05/05/14 05:18 AM
Re: 5/16 pushrods with solid roller	mshred	05/05/14 05:26 AM
Re: 5/16 pushrods with solid roller	skrews	05/05/14 05:34 AM
Re: 5/16 pushrods with solid roller	Guitar Jones	05/05/14 01:30 PM
Re: 5/16 pushrods with solid roller	Triple Threat	05/05/14 05:18 PM
Re: 5/16 pushrods with solid roller	mshred	05/05/14 06:49 PM
Re: 5/16 pushrods with solid roller	Streetwize	05/05/14 06:57 PM
Re: 5/16 pushrods with solid roller	Leon441	05/05/14 07:05 PM
Re: 5/16 pushrods with solid roller	mshred	05/05/14 09:39 PM
Re: 5/16 pushrods with solid roller	mshred	05/05/14 07:13 PM
Re: 5/16 pushrods with solid roller	MR_P_BODY	05/06/14 12:03 AM
Re: 5/16 pushrods with solid roller	mshred	05/06/14 12:13 AM
Re: 5/16 pushrods with solid roller	MR_P_BODY	05/06/14 12:43 AM
Re: 5/16 pushrods with solid roller	mshred	05/06/14 12:53 AM
Re: 5/16 pushrods with solid roller	D-50	05/06/14 01:12 AM
Re: 5/16 pushrods with solid roller	mshred	05/06/14 01:20 AM
Re: 5/16 pushrods with solid roller	D-50	05/06/14 01:27 AM
Re: 5/16 pushrods with solid roller	mshred	05/06/14 01:28 AM
Re: 5/16 pushrods with solid roller	D-50	05/06/14 01:39 AM
Re: 5/16 pushrods with solid roller	mshred	05/06/14 02:27 AM
Re: 5/16 pushrods with solid roller	gtea1901	05/06/14 02:51 AM
Re: 5/16 pushrods with solid roller	mshred	05/06/14 04:30 AM
Re: 5/16 pushrods with solid roller	D-50	05/06/14 02:52 AM
Re: 5/16 pushrods with solid roller	mshred	05/06/14 04:31 AM
Re: 5/16 pushrods with solid roller	Guitar Jones	05/06/14 01:04 PM
Re: 5/16 pushrods with solid roller	gtea1901	05/06/14 02:34 PM
Re: 5/16 pushrods with solid roller	1967dartgt	05/06/14 05:01 PM
Re: 5/16 pushrods with solid roller	mshred	05/06/14 06:47 PM
Re: 5/16 pushrods with solid roller	MR_P_BODY	05/06/14 07:42 PM
Re: 5/16 pushrods with solid roller	gtea1901	05/06/14 08:04 PM
Re: 5/16 pushrods with solid roller	dogdays	05/07/14 01:07 AM
Re: 5/16 pushrods with solid roller	B3422W5	05/07/14 02:58 AM
Re: 5/16 pushrods with solid roller	MR_P_BODY	05/07/14 03:25 AM
Re: 5/16 pushrods with solid roller	mshred	05/07/14 04:02 AM
Re: 5/16 pushrods with solid roller	mshred	05/06/14 06:46 PM
Re: 5/16 pushrods with solid roller	mshred	05/06/14 06:46 PM
Re: 5/16 pushrods with solid roller	LSP	05/06/14 02:20 AM
Re: 5/16 pushrods with solid roller	mshred	05/06/14 02:26 AM
Re: 5/16 pushrods with solid roller	LSP	05/06/14 02:39 AM
Re: 5/16 pushrods with solid roller	mshred	05/06/14 04:29 AM
Re: 5/16 pushrods with solid roller	fishy340	05/07/14 03:43 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To