Measured my blocks ridge,rigid hone ok or have to bore?

Print Thread

Re: Measured my blocks ridge,rigid hone ok or have to bore? [Re: Crizila] #1584620 02/26/14 11:00 PM 02/26/14 11:00 PM
Joined: Jan 2003 Posts: 10,766 Central Valley, CA. Quicksilver440 OP I Live Here
Quicksilver440 OP I Live Here Joined: Jan 2003 Posts: 10,766 Central Valley, CA.	Quote: "Low buck build", ridged hone it and run it. My only hesitation is changing to the higher Compression height pistons.....

Entire Thread
Subject	Posted By	Posted
Measured my blocks ridge,rigid hone ok or have to bore?	Quicksilver440	02/27/14 12:03 AM
Re: Measured my blocks ridge,rigid hone ok or have to bore?	Crizila	02/27/14 02:56 AM
Re: Measured my blocks ridge,rigid hone ok or have to bore?	Quicksilver440	02/27/14 03:00 AM
Re: Measured my blocks ridge,rigid hone ok or have to bore?	MR_P_BODY	02/27/14 03:03 AM
Re: Measured my blocks ridge,rigid hone ok or have to bore?	dogdays	02/27/14 04:46 AM
Re: Measured my blocks ridge,rigid hone ok or have to bore?	Quicksilver440	02/27/14 06:05 AM
Re: Measured my blocks ridge,rigid hone ok or have to bore?	MR_P_BODY	02/27/14 07:49 AM
Re: Measured my blocks ridge,rigid hone ok or have to bore?	Quicksilver440	02/27/14 08:03 AM
Re: Measured my blocks ridge,rigid hone ok or have to bore?	85_Ram_4speed	02/27/14 01:17 PM
Re: Measured my blocks ridge,rigid hone ok or have to bore?	Performance Only	02/27/14 07:27 PM
Re: Measured my blocks ridge,rigid hone ok or have to bore?	CHAPPER	02/27/14 07:46 PM
Re: Measured my blocks ridge,rigid hone ok or have to bore?	Quicksilver440	02/27/14 07:56 PM

Hop To