Quote:

Yes it is for the the screw in plate without an adapter. I know that I need it otherwise you will successfully empty the oil all over the place and make a huge mess. I have seen it happen. I know they come in the engine gasket kits but I wanted the part number if I ever needed it by itself. Thanks to all for their input.



I'm sure I got one set from Greg(Superformce Gasket)
but I dont have the package around to get the number..
all it was, was the big(maybe 5" dia) and the small
3/4" for the stud on the center that the filter
mounts on.... I know I talked to Greg on this because
I asked about the thickness of the large gasket...
I was having issues with the outer gasket sealing
with the plate I had... it was either grind down the
center area where the center stud goes in or double
up the large gaskets... I think some where over the
years the step in the plate changed and the one I
had didnt have enough to seal the outer OD with just
one gasket.... I ended up glueing the 2 gaskets together
due to the engine was already in the car... if it
wasnt in I would have milled the center area down some