Quote:
There's an clip which holds the mirror remote control to the door panel. Similar to what's on the picture here
Link didn't seem to work, so here's the image..
The part you need that "holds" the cable adjuster knob and the locking bezel is the flat-square shaped component between the screws and bezel..
I just finished a restoration on a '71 Challenger R/T and very fresh with the mirror installation. It can be a bear, but once you get it started, it'll tighten up.....
Last edited by hemi68charger; 01/08/14 10:36 AM.
TroyHouston Mopar Connection Club'69 Charger Daytona 440 - auto - 4.10 Dana (now with 426 hemi)
'69 Charger 500 440 - 4speed - 3.54 Dana
'70 Road Runner 383 - 4speed - a/c (now with 440)
