SB Gear Drives and Timing - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech SB Gear Drives and Timing

Print Thread

Re: SB Gear Drives and Timing [Re: Racebuddy] #1553535 12/30/13 01:26 AM 12/30/13 01:26 AM
Joined: Jan 2003 Posts: 543 Indiana, Just Off I-70 BradD mopar
BradD mopar Joined: Jan 2003 Posts: 543 Indiana, Just Off I-70	It sounds like dizzy 180 off to me also. Make sure you have a good ground from chassis to block. Put a battery charger on boost while cranking to start. You want 10+ minimum volts while cranking. If using manual choke leave about 3/16" gap from blade to body.Too much gap = Lean and that = pop back through carb. Gas needs to be fresh, not sittting in tank for months. Brad Check out the Dorn's 69 Barracuda "Switchblade" in the Nov.2010 MCG Check out the Dorn's refurbished 36 Ford in the Feb.2011 Street Rodder

Entire Thread
Subject	Posted By	Posted
SB Gear Drives and Timing	Racebuddy	12/26/13 11:13 PM
Re: SB Gear Drives and Timing	Dodgem	12/29/13 10:07 PM
Re: SB Gear Drives and Timing	Leon441	12/30/13 01:02 AM
Re: SB Gear Drives and Timing	MR_P_BODY	12/30/13 01:12 AM
Re: SB Gear Drives and Timing	Racebuddy	12/30/13 03:47 AM
Re: SB Gear Drives and Timing	dartman366	12/30/13 03:57 AM
Re: SB Gear Drives and Timing	Racebuddy	12/31/13 03:56 AM
Re: SB Gear Drives and Timing	MR_P_BODY	12/30/13 04:08 AM
Re: SB Gear Drives and Timing	BradD	12/30/13 05:26 AM
Re: SB Gear Drives and Timing	MR_P_BODY	12/30/13 05:34 AM
Re: SB Gear Drives and Timing	Racebuddy	12/30/13 08:53 PM
Re: SB Gear Drives and Timing	MR_P_BODY	12/30/13 10:35 PM
Re: SB Gear Drives and Timing	Racebuddy	12/30/13 11:20 PM
Re: SB Gear Drives and Timing	MR_P_BODY	12/30/13 11:31 PM
Re: SB Gear Drives and Timing	Racebuddy	12/31/13 12:15 AM
Re: SB Gear Drives and Timing	Plumb Wired	12/30/13 11:09 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1