Quote: No, they are not all the same. Here is the caliper that works for rear hung applications. The vent is at the top and the hose comes out at a good angle to be rear mounted.
Yea I see the problem now- I just looked at the calipers I currently have and the hose routes to the 'top' of the caliper, near the bleeder valve. So they DID relocate the hose inlet to the opposide side in 1980 and up.
I've got a set of rebuilt calipers that I used the salvage yard ones for exchange - I'll see if I can exchange these for a 1980 and newer set....
One other question- I've also bought a set of new pads- will they still work on a 1980 caliper?
