Should have made power steering aluminum

Print Thread

Re: Should have made power steering aluminum [Re: AndyF] #1510743 10/01/13 08:59 PM 10/01/13 08:59 PM
Joined: Jan 2009 Posts: 813 Ontario,Canada brads70 super stock
brads70 super stock Joined: Jan 2009 Posts: 813 Ontario,Canada	Quote: I don't think there is any reason a PS box couldn't be made from aluminum. The factory just did it the cheapest way possible back in the 60' and 70's. FFI doesn't have enough cash to re-tool the entire case so they use factory cores. It would cost $$$ to tool up an aluminum PS box. I bet a person could build a billet PS box. Hummm interesting! I'm needing a project this winter! I've got a few bigger blocks of 7075 aluminum kicking around.... Last edited by brads70; 10/01/13 09:02 PM.

Entire Thread
Subject	Posted By	Posted
Should have made power steering aluminum	RylisPro	10/01/13 06:41 PM
Re: Should have made power steering aluminum	Mopar Mitch	10/01/13 07:09 PM
Re: Should have made power steering aluminum	brads70	10/01/13 07:21 PM
Re: Should have made power steering aluminum	RylisPro	10/01/13 07:53 PM
Re: Should have made power steering aluminum	72Swinger	10/01/13 08:52 PM
Re: Should have made power steering aluminum	RylisPro	10/01/13 10:37 PM
Re: Should have made power steering aluminum	72Swinger	10/01/13 11:05 PM
Re: Should have made power steering aluminum	RylisPro	10/01/13 11:21 PM
Re: Should have made power steering aluminum	ahy	10/02/13 12:44 AM
Re: Should have made power steering aluminum	RylisPro	10/02/13 01:12 AM
Re: Should have made power steering aluminum	Mopar Mitch	10/02/13 06:59 AM
Re: Should have made power steering aluminum	72Swinger	10/02/13 03:45 AM
Re: Should have made power steering aluminum	RylisPro	10/02/13 04:42 AM
Re: Should have made power steering aluminum	BergmanAutoCraft	10/06/13 12:42 PM
Re: Should have made power steering aluminum	74_360_Cuda	10/11/13 02:07 AM
Re: Should have made power steering aluminum	1972CudaV21	10/11/13 06:07 PM
Re: Should have made power steering aluminum	jcc	10/11/13 06:24 PM
Re: Should have made power steering aluminum	BergmanAutoCraft	10/11/13 10:39 PM
Re: Should have made power steering aluminum	PHJ426	10/11/13 10:43 PM
Re: Should have made power steering aluminum	72Swinger	10/11/13 10:54 PM
Re: Should have made power steering aluminum	jcc	10/12/13 10:00 PM
Re: Should have made power steering aluminum	RylisPro	10/12/13 10:17 PM
Re: Should have made power steering aluminum	BigBlockMopar	10/12/13 10:43 PM
Re: Should have made power steering aluminum	jcc	10/13/13 01:25 AM
Re: Should have made power steering aluminum	AndyF	10/01/13 09:10 PM
Re: Should have made power steering aluminum	jcc	10/01/13 09:28 PM
Re: Should have made power steering aluminum	blown340	10/01/13 09:38 PM
Re: Should have made power steering aluminum	Supercuda	10/01/13 09:47 PM
Re: Should have made power steering aluminum	brads70	10/02/13 01:01 AM
Re: Should have made power steering aluminum	brads70	10/02/13 12:59 AM
Re: Should have made power steering aluminum	relax383	10/06/13 11:13 AM
Re: Should have made power steering aluminum	jcc	10/06/13 07:44 PM
Re: Should have made power steering aluminum	brads70	10/07/13 01:17 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer, tommoparts

Hop To