This did not work - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech This did not work

Print Thread

Re: This did not work [Re: 65 Belv A990] #1510080 09/30/13 07:28 PM 09/30/13 07:28 PM
Joined: Apr 2006 Posts: 3,675 Akron, Ohio U.S.A. roadhazard master
roadhazard master Joined: Apr 2006 Posts: 3,675 Akron, Ohio U.S.A.	Mike you need to cut those primary tubes about 5" shorter then re-weld your collector on. Then you can weld the large elbow to it like these. 7870937-Hedman75161.jpg (124 downloads)

Entire Thread
Subject	Posted By	Posted
This did not work	Clanton	09/30/13 09:18 PM
Re: This did not work	Guitar Jones	09/30/13 09:25 PM
Re: This did not work	Challenger 1	09/30/13 09:32 PM
Re: This did not work	Clanton	09/30/13 09:38 PM
Re: This did not work	Clanton	09/30/13 09:42 PM
Re: This did not work	65 Belv A990	09/30/13 10:40 PM
Re: This did not work	roadhazard	09/30/13 11:28 PM
Re: This did not work	Clanton	09/30/13 11:41 PM
Re: This did not work	D-50	09/30/13 11:48 PM
Re: This did not work	Clanton	10/01/13 12:05 AM
Re: This did not work	D-50	10/01/13 12:18 AM
Re: This did not work	Clanton	10/01/13 12:45 AM
Re: This did not work	Sport440	10/01/13 12:51 AM
Re: This did not work	cudadoug	10/01/13 01:19 AM
Re: This did not work	D-50	10/01/13 03:43 AM
Re: This did not work	barracuda7199	10/01/13 01:24 AM
Re: This did not work	ProSport	09/30/13 11:33 PM
Re: This did not work	cudadoug	10/01/13 01:15 AM
Re: This did not work	Clanton	10/01/13 01:19 AM
Re: This did not work	RAMM	10/01/13 02:30 AM
Re: This did not work	Clanton	10/01/13 02:37 AM
Re: This did not work	cudadoug	10/01/13 06:47 AM
Re: This did not work	BobR	10/01/13 03:15 PM
Re: This did not work	gregsdart	10/01/13 02:01 AM
Re: This did not work	Clanton	10/01/13 01:51 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1