Gauging Interest in Hawk HP+ for Mopar 11.75" Pin

Print Thread

Re: Gauging Interest in Hawk HP+ for Mopar 11.75" Pin [Re: RylisPro] #1506385 09/26/13 11:34 AM 09/26/13 11:34 AM
Joined: Sep 2003 Posts: 10,645 Houston, Tx A AlexP OP I Live Here
AlexP OP I Live Here A Joined: Sep 2003 Posts: 10,645 Houston, Tx	I just think there are a lack of good pads for the 11.75" Pin/Slider. An HP+ with a single piston caliper and a 12.2" rotor stops my 3300 lb GTI Like a champ. I've had a 14" brembo 4 piston on the car and it stopped amazingly well. Good pads even with the single caliper would do well for even the majority of the aggressive street drivers and light HPDE people here. I will end up with a Dr. Diff kit, but for now pads would solve a lot of problems. My Build thread: Let the hemi swap begin! 1968 wanna be pro touring whatchamacallit with some fancy stuff and a new roof skin.

Entire Thread
Subject	Posted By	Posted
Gauging Interest in Hawk HP+ for Mopar 11.75" Pin	AlexP	09/23/13 05:47 PM
Re: Gauging Interest in Hawk HP+ for Mopar 11.75" Pin	Dan@Hotchkis	09/23/13 06:03 PM
Re: Gauging Interest in Hawk HP+ for Mopar 11.75" Pin	AlexP	09/23/13 06:12 PM
Re: Gauging Interest in Hawk HP+ for Mopar 11.75" Pin	TC@HP2	09/25/13 03:11 PM
Re: Gauging Interest in Hawk HP+ for Mopar 11.75" Pin	AlexP	09/25/13 04:13 PM
Re: Gauging Interest in Hawk HP+ for Mopar 11.75" Pin	AlexP	09/25/13 05:10 PM
Re: Gauging Interest in Hawk HP+ for Mopar 11.75" Pin	jcc	09/25/13 06:52 PM
Re: Gauging Interest in Hawk HP+ for Mopar 11.75" Pin	BigBlockMopar	09/25/13 07:20 PM
Re: Gauging Interest in Hawk HP+ for Mopar 11.75" Pin	PHJ426	09/25/13 07:43 PM
Re: Gauging Interest in Hawk HP+ for Mopar 11.75" Pin	RylisPro	09/25/13 06:58 PM
Re: Gauging Interest in Hawk HP+ for Mopar 11.75" Pin	feets	09/25/13 09:36 PM
Re: Gauging Interest in Hawk HP+ for Mopar 11.75" Pin	RylisPro	09/25/13 10:13 PM
Re: Gauging Interest in Hawk HP+ for Mopar 11.75" Pin	AlexP	09/26/13 03:34 PM
Re: Gauging Interest in Hawk HP+ for Mopar 11.75" Pin	Twostick	03/24/14 06:10 AM
Re: Gauging Interest in Hawk HP+ for Mopar 11.75" Pin	Supercuda	03/24/14 02:03 PM
Re: Gauging Interest in Hawk HP+ for Mopar 11.75" Pin	Dan@Hotchkis	03/24/14 04:14 PM
Re: Gauging Interest in Hawk HP+ for Mopar 11.75" Pin	Twostick	03/25/14 03:10 AM
Re: Gauging Interest in Hawk HP+ for Mopar 11.75" Pin	Dan@Hotchkis	03/25/14 06:04 AM
Re: Gauging Interest in Hawk HP+ for Mopar 11.75" Pin	gdonovan	03/27/14 02:14 AM
Re: Gauging Interest in Hawk HP+ for Mopar 11.75" Pin	Uhcoog1	09/28/13 01:15 PM
Re: Gauging Interest in Hawk HP+ for Mopar 11.75" Pin	DynoDave	09/28/13 04:16 PM
Re: Gauging Interest in Hawk HP+ for Mopar 11.75" Pin	AlexP	09/30/13 05:56 AM
Re: Gauging Interest in Hawk HP+ for Mopar 11.75" Pin	dangina	09/30/13 07:55 AM
Re: Gauging Interest in Hawk HP+ for Mopar 11.75" Pin	mod5v	10/02/13 06:55 PM
Re: Gauging Interest in Hawk HP+ for Mopar 11.75" Pin	ahy	03/26/14 01:58 AM
Re: Gauging Interest in Hawk HP+ for Mopar 11.75" Pin	BigBlockMopar	03/23/14 01:32 AM
Re: Gauging Interest in Hawk HP+ for Mopar 11.75" Pin	AlexP	03/23/14 06:19 AM
Re: Gauging Interest in Hawk HP+ for Mopar 11.75" Pin	astjp2	03/23/14 07:39 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer, tommoparts

Hop To