Wheel spacers 1/4 to 3/8 Where to get/work alright?

Print Thread

Re: Wheel spacers 1/4 to 3/8 Where to get/work alright? [Re: 340SHORTY] #1491706 08/27/13 07:15 PM 08/27/13 07:15 PM
Joined: Jan 2007 Posts: 7,664 IN A ahy master
ahy master A Joined: Jan 2007 Posts: 7,664 IN	I believe the Intrepid uses a metric bolt pattern. 1.5 mm or so different from the 70's standard. Close but not the same. My favorite tire store usually has used tires on hand... maybe find a set of those to get her rolling with the original wheels.

Entire Thread
Subject	Posted By	Posted
Wheel spacers 1/4 to 3/8 Where to get/work alright?	krisiesmopes	08/27/13 09:38 PM
Re: Wheel spacers 1/4 to 3/8 Where to get/work alright?	stumpy	08/27/13 09:47 PM
Re: Wheel spacers 1/4 to 3/8 Where to get/work alright?	krisiesmopes	08/27/13 10:13 PM
Re: Wheel spacers 1/4 to 3/8 Where to get/work alright?	stumpy	08/27/13 10:26 PM
Re: Wheel spacers 1/4 to 3/8 Where to get/work alright?	Supercuda	08/27/13 10:37 PM
Re: Wheel spacers 1/4 to 3/8 Where to get/work alright?	340SHORTY	08/27/13 10:53 PM
Re: Wheel spacers 1/4 to 3/8 Where to get/work alright?	dogdays	08/27/13 11:14 PM
Re: Wheel spacers 1/4 to 3/8 Where to get/work alright?	In_The_Pink	08/28/13 01:58 AM
Re: Wheel spacers 1/4 to 3/8 Where to get/work alright?	Jerry	08/28/13 03:27 AM
Re: Wheel spacers 1/4 to 3/8 Where to get/work alright?	krisiesmopes	08/28/13 06:00 PM
Re: Wheel spacers 1/4 to 3/8 Where to get/work alright?	dogdays	08/28/13 06:43 PM
Re: Wheel spacers 1/4 to 3/8 Where to get/work alright?	ahy	08/27/13 11:15 PM
Re: Wheel spacers 1/4 to 3/8 Where to get/work alright?	stumpy	08/27/13 11:18 PM
Re: Wheel spacers 1/4 to 3/8 Where to get/work alright?	OzHemi	08/27/13 11:19 PM
Re: Wheel spacers 1/4 to 3/8 Where to get/work alright?	dogdays	08/27/13 11:44 PM
Re: Wheel spacers 1/4 to 3/8 Where to get/work alright?	krisiesmopes	08/28/13 12:29 AM

Hop To