I just pulled the 79 300 out of the weeds to use for a winter beater. The fronts were flat, so I put on a pair of 16" wheels with winter tires from a 2000 Intrepid. Seemed like a good fit, but as I got it to roll, the edge of the wheel catches the upper control arm. It looks like a 1/4 to 3/8 spacer would solve this problem. Studs seem long enough, but could swap to 3" or something if needed. I know they would need the center hole to match the hub...just wondering where to get, and/or if this is a feasible idea.

I have these 16's with 4 good winter tires, so it will save me buying a full set of tires.