Quote:
Quote:
We currently run a 512 RB with out of the box EZ heads, and is making 700hp on pump gas. We run a solid mechanical cam, 10.7:1 pistons, and a 950 Proform carb jetted up at least 2 all the way around. The block was treated to a girdle and a big oil pan, but not much else...Our cam is about .670" but you can detune it with a mild street cam. I normally don't care for Eddy heads, and about where they flow fully ported are about where these start out of the box.
Dragula, what car is this motor in? What ET is it running and at what weight?
We run that in the Duster...3150lbs with me in it ran 10.07 leaving at only 2100rpm shifting at only 6400...We are not running it as hard as we could.
|