904 not going into 3rd all the time.....

Print Thread

Re: 904 not going into 3rd all the time..... [Re: Hailtheleaf538] #1475178 07/29/13 05:48 PM 07/29/13 05:48 PM
Joined: Jan 2003 Posts: 25,903 Rio Linda, CA John_Kunkel Too Many Posts
John_Kunkel Too Many Posts Joined: Jan 2003 Posts: 25,903 Rio Linda, CA	The generic GM throttle levers found on most aftermarket carbs doesn't work with factory Mopar linkage that's why you need the Mopar throttle lever extension. The AFB and Edelbrock need the part number 1481 shown below. The archives has pics of various linkage configurations for reference. http://www.moparts.org/Tech/Archive/auto/35.html 7794593-Edelbrock-1481.jpg (24 downloads)

Entire Thread
Subject	Posted By	Posted
904 not going into 3rd all the time.....	Hailtheleaf538	07/28/13 12:35 PM
Re: 904 not going into 3rd all the time.....	RapidRobert	07/28/13 02:37 PM
Re: 904 not going into 3rd all the time.....	bboogieart	07/28/13 03:08 PM
Re: 904 not going into 3rd all the time.....	Hailtheleaf538	07/28/13 07:08 PM
Re: 904 not going into 3rd all the time.....	70AARcuda	07/28/13 07:27 PM
Re: 904 not going into 3rd all the time.....	Hailtheleaf538	07/28/13 08:57 PM
Re: 904 not going into 3rd all the time.....	John_Kunkel	07/28/13 08:59 PM
Re: 904 not going into 3rd all the time.....	Hailtheleaf538	07/29/13 03:59 AM
Re: 904 not going into 3rd all the time.....	John_Kunkel	07/29/13 09:48 PM

Hop To