chamfer at top of cylinder 440 - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech chamfer at top of cylinder 440

Print Thread

Re: chamfer at top of cylinder 440 [Re: BSB67] #1467205 07/13/13 06:45 PM 07/13/13 06:45 PM
Joined: Mar 2007 Posts: 3,300 Northern Indiana Dunnuck Racing master
Dunnuck Racing master Joined: Mar 2007 Posts: 3,300 Northern Indiana	I honestly wouldn't be too worried about it. The edge of the head will gang over the same area the gasket would in most cases . One of my good friends/ customers runs an Edelbrock headed440 with huge chamfers on it. 11.2 to one on pump gas,bracket car. Been running that block for several years with 1009 FelPro gaskets. Keith www.dunnuckracing.com

Entire Thread
Subject	Posted By	Posted
chamfer at top of cylinder 440	BeeSuper	07/13/13 03:20 PM
Re: chamfer at top of cylinder 440	domingo	07/13/13 04:38 PM
Re: chamfer at top of cylinder 440	dodgeboy11	07/13/13 05:17 PM
Re: chamfer at top of cylinder 440	MR_P_BODY	07/13/13 05:29 PM
Re: chamfer at top of cylinder 440	BeeSuper	07/13/13 08:08 PM
Re: chamfer at top of cylinder 440	BSB67	07/13/13 08:33 PM
Re: chamfer at top of cylinder 440	Dunnuck Racing	07/13/13 10:45 PM
Re: chamfer at top of cylinder 440	Crizila	07/13/13 11:51 PM
Re: chamfer at top of cylinder 440	dodgeboy11	07/14/13 01:51 AM
Re: chamfer at top of cylinder 440	BeeSuper	07/14/13 04:27 PM
Re: chamfer at top of cylinder 440	dogdays	07/14/13 10:03 PM
Re: chamfer at top of cylinder 440	BeeSuper	07/15/13 01:33 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1