Quote:

Don't take this the wrong way, Ive just ran into the same issues with my coronet.
Have you put the dipstick in it yet?
Looks good but putting the dipstick in and out may be a little tough with such a sharp bend. How is removal of the tube? It being on the side with the starter if you ever have to loosen up the header to change the starter " and you will!" that tube may have to come out so you can finagle the starter out and back in.




If this ? was for me, ...yes I mentioned in my 1st post it's a little tuff for the stick to get past the last bend, but by choking up on the stick it gets past that, then its fine.

Had to loosen the header to remove it (also made the tube part that's in the block 1/4" shorter so it doesn't have to come out as far), but like you say, if I'm changing the starter, the header has to come loose anyway.