Quote:

Quote:



shifter is MAI on all i find so far.

I check a ax-15 jeep 5 speed...close but no fit on the a535

I assume the 4cly will have a bell of its own and maybe the 4 speed trans listed may have the right shift lever.

looks like a boll on a shft then flats ground on both side to fit thru the 2 outer shift rail pawls

you can see it has to be thin to slide between the 2 square looking outer rail pawls to move the thin one in the middle





looking at the pictures and your description, that sounds like a NVG4500 shifter *might* work. can you give me the dimensions of the bolt pattern, and height from the mounting face to the rail socket?



the mout bolt patteren is 4" across side to side and 3.5 front to back

from the top of the lug to top of shifter flange is 1 3/8" and about 2" to the bottom of the cup area.

I looked at a nv4500 and it has the flats like needed but if it fits is another story. to price to buy just to find out it dont.