Here is an update. In regards to previous poster the only window that does not work is the passenger front and that is in the up only. It will go down with no problem. Also the 4 way switch on the drivers side will operate the drivers and 2 back windows but not the passenger side. I have checked today and both switches work fine, the harness from the switch to the motor works fine. I can jump the motor at the switch plug and reverse polarity and the window will go up and down fine. The tan wire that feeds both switches from the power fuse are both showing 12 volts. Is there a relay that operates these switches? I have seen a schematic that shows it but have no idea where they would be located. I have check both fuse panels and see no relays listed for the power windos. All other fuses, etc, appear to be good. Any help would be appreciated. I have not looked into the harness between the doors and body yet but will if I have to. Want to see what anyone else feels about it first. Thanks.