Thanks Ari440,

Combo is a 400 block based 512 with aluminum caps and a girdle. compression is 13.4 - 1 with a small roller cam from Scott Brown. Heads are a set of Modern Cylinder Heads ported Indy SR's. intake is from indy, Harland Sharp 1.5 rockers. Hooker fenderwell headers and 3.5" flowmaster exhaust that exited in front of the rear tires.

1:80 gear powerglide with a ptc 5600 stall converter.

Round tube rear chassis with a 4 link and a Fab 9 inch rear end. Front frame rails are stock. Still retains stock fire wall and factory floor boards and trans tunnel. It still has the factory dash. 4.56 rear gears and a 16" x 32" slick

Front end is a rack and pinion set up that I built myself. Car is all steel with the exception of the bumpers hood and trunk. Car still has all of the factor glass in it and weighed 3080 lbs with my big butt in it at the last national event I was at.

I have some new stuff that will be installed for this season. it should go a little better but knowing my luck I will slow it down.

Love your car too and all of the Awesome A-bodies in this post!