Quote:


I put them on dry the first time. I have reused felpro intake gaskets up to 3x with a little rtv around the water ports after first install dry.



Are you saying that you put the gasket on dry and then torque down and run the motor that way? And then if you ever have to remove the intake at a later date you reuse the gasket and just add a rtv to the water ports? So no rtv around your water on the initial use and you get good sealing results? If so, I'll give that a shot.

roe


1971 Plymouth Satellite
408/904 8 3/4 3.23 SG