Quote:

---

I want to put a different wheel on the back of the Demon, can I buy 4.5 bc axles that will work with the brakes on the car so I just have to re-drill the drums.

---

No I had Strange make me a custom set of 35 spline race axles for my 1969 Dart 8 3/4 housing with the stock A body small brakes, the stock axles spacing between the axle flange and the bearings is different on A bodys than all the rest They built the axles and when I went to use them I had to have the outer edges of the flanges cut down to clear the stock drums $75.00 by a local machine shop to reduce the axle falnges and another $25.00 to drill the larger 4.5 pattern in the stock drums and enlarge the center hole on the drums to fit over the new axle centering ring OP, have your axles and drums drilled and tapped for the 1/2x20 screw in studs I've had that done a bunch of times on stock axles, works good, last a long time