Quote:

Raised the concern to my transmission guy. He couldn't advise me either way so he wanted to put a number on it.

Pulled the truck into his shop and disconnected my transmission lines. He then connected them up to his machine which measured the flow. Today I do not recall the number but he was more than satified with the Gallons/minute his machine was flowing through my cooler set up so he gave it his passing grade.



If that machine has more output than the pump in a torqueflite then the results aren't necessarily accurate. If a 5/16 hydraulic circuit has too many pressure drops for the 3/8 application, but a larger pump is installed for testing purposes, then the flowrate of the circuit could be mistakenly seen to be enough. There are a lot of variables here, though -- just food4though.