Axle housing studs versus B/RB exhaust studs

Print Thread

Re: Axle housing studs versus B/RB exhaust studs [Re: JohnRR] #141834 10/27/08 04:45 PM 10/27/08 04:45 PM
Joined: Jan 2003 Posts: 25,960 Rio Linda, CA John_Kunkel Too Many Posts
John_Kunkel Too Many Posts Joined: Jan 2003 Posts: 25,960 Rio Linda, CA	Quote: the stud in the housing for the center I am pretty sure is the same as the studs on the end axle tubes . The center section studs are about 1/4" longer than the backing plate studs. Mancini has a bubble packed hardware kit with all of the studs/nuts. The INTERNET, the MISinformation superhighway

Entire Thread
Subject	Posted By	Posted
Axle housing studs versus B/RB exhaust studs	gtx6970	10/26/08 11:22 PM
Re: Axle housing studs versus B/RB exhaust studs	slantzilla	10/26/08 11:38 PM
Re: Axle housing studs versus B/RB exhaust studs	fourgearsavoy	10/27/08 01:25 AM
Re: Axle housing studs versus B/RB exhaust studs	belv2vert66	10/27/08 01:29 AM
Re: Axle housing studs versus B/RB exhaust studs	Pacnorthcuda	10/27/08 01:47 AM
Re: Axle housing studs versus B/RB exhaust studs	pishta	10/27/08 04:22 AM
Re: Axle housing studs versus B/RB exhaust studs	JohnRR	10/27/08 01:42 AM
Re: Axle housing studs versus B/RB exhaust studs	John_Kunkel	10/27/08 08:45 PM

Hop To