Tune will be up massively this April. Steve Morris will be on site for the motor and Jake Brantner will be on site for the Chassis. I ran that 8 from idle off the line and 50% throttle. I plan on running a 7 from idle off the line petal to the metal the whole way. Then I will take 10 degrees out across the board and start launching @ 4500+ RPM's. I'm going to set my tune with 10 degrees out across and she should be competitive. When I make is back to BG, she will then be set to straight up kill.
Its good to see you have a lot left in it 
see you in Sept... I want to check out your ride in
person
