Quote:

If that's the most run out then just run them. You will never notice that.




If the one in the video is the worst of them, you will probably never notice. As long as you don't put on low profile / stiff sidewall tires and or run higher pressure in them you should be fine.

I did have some wheels straightened in an old school shop years ago. They were much worse than yours. No cutting and welding, just a clamp in the center, two guys, and a huge freaking prybar with adapters to the wheel lip shape. I doubt they came out much better than what you are starting with and I ran them for years.

"The happiness of your life depends upon the quality of
your thoughts" ~ Roman Emperor Marcus Aurelius