1/2 stainless from fine lines for efi ?

Print Thread

Re: 1/2 stainless from fine lines for efi ? [Re: sublimehemi] #1378664 02/12/13 12:48 AM 02/12/13 12:48 AM
Joined: May 2005 Posts: 1,130 Dayton, Ohio W wldtm super stock
wldtm super stock W Joined: May 2005 Posts: 1,130 Dayton, Ohio	Quote: i have read that some of the guys here have ordered 1/2 stainless fuel line from fine lines that was pre bent...how did it fit????? i am also considering ordering the return line in 3/8...i konw our cars came with 3/8 fuel with 1/4 return and i am wondering if 1/2 fuel and 3/8 return will fit with minor tweaking in factory location ??? i really want this set up to work for my 700hp efi project...any thoughts will help.i posted this under question and answer and got no response so any info will help... I wanted to run stainless with the factory style quick connects on my efi system, and not use any AN adapters, but I could not flare the stainless with the hyrdaulic tool. I went with aluminum, used scotch bright and put a brush finish on it. Now no rust on the inside or out, its easier to manipulate that steel or stainless, and was cheaper. My opinion. I also used the rock valley set up. Very happy with their set up. JM Interested in having you car wired? Drag car, street car, EFI swap? PM for details

Entire Thread
Subject	Posted By	Posted
1/2 stainless from fine lines for efi ?	sublimehemi	01/30/13 08:10 PM
Re: 1/2 stainless from fine lines for efi ?	DJVCuda	01/30/13 08:58 PM
Re: 1/2 stainless from fine lines for efi ?	sublimehemi	01/31/13 05:32 AM
Re: 1/2 stainless from fine lines for efi ?	Quicksilver440	01/31/13 05:57 AM
Re: 1/2 stainless from fine lines for efi ?	sublimehemi	01/31/13 07:07 AM
Re: 1/2 stainless from fine lines for efi ?	540challenger	01/31/13 02:19 PM
Re: 1/2 stainless from fine lines for efi ?	jbc426	01/31/13 05:21 PM
Re: 1/2 stainless from fine lines for efi ?	jbc426	01/31/13 05:26 PM
Re: 1/2 stainless from fine lines for efi ?	jbc426	01/31/13 05:32 PM
Re: 1/2 stainless from fine lines for efi ?	Quicksilver440	02/11/13 10:08 PM
Re: 1/2 stainless from fine lines for efi ?	JohnRR	02/11/13 11:10 PM
Re: 1/2 stainless from fine lines for efi ?	Quicksilver440	02/11/13 11:23 PM
Re: 1/2 stainless from fine lines for efi ?	JohnRR	02/11/13 11:47 PM
Re: 1/2 stainless from fine lines for efi ?	Quicksilver440	02/12/13 01:29 AM
Re: 1/2 stainless from fine lines for efi ?	jbc426	02/13/13 01:53 AM
Re: 1/2 stainless from fine lines for efi ?	Quicksilver440	02/13/13 02:07 AM
Re: 1/2 stainless from fine lines for efi ?	jbc426	02/13/13 02:33 AM
Re: 1/2 stainless from fine lines for efi ?	Quicksilver440	02/13/13 04:55 AM
Re: 1/2 stainless from fine lines for efi ?	jbc426	02/13/13 05:42 AM
Re: 1/2 stainless from fine lines for efi ?	DJVCuda	01/31/13 05:37 PM
Re: 1/2 stainless from fine lines for efi ?	jbc426	01/31/13 05:51 PM
Re: 1/2 stainless from fine lines for efi ?	jbc426	01/31/13 05:53 PM
Re: 1/2 stainless from fine lines for efi ?	jbc426	01/31/13 05:55 PM
Re: 1/2 stainless from fine lines for efi ?	jbc426	01/31/13 06:26 PM
Re: 1/2 stainless from fine lines for efi ?	JohnRR	02/11/13 11:05 PM
Re: 1/2 stainless from fine lines for efi ?	jbc426	02/13/13 02:06 AM
Re: 1/2 stainless from fine lines for efi ?	74yellowduster	02/13/13 01:57 PM
Re: 1/2 stainless from fine lines for efi ?	jbc426	02/13/13 02:52 PM
Re: 1/2 stainless from fine lines for efi ?	74yellowduster	02/13/13 04:03 PM
Re: 1/2 stainless from fine lines for efi ?	Quicksilver440	02/13/13 04:13 PM
Re: 1/2 stainless from fine lines for efi ?	JohnRR	02/13/13 03:49 PM
Re: 1/2 stainless from fine lines for efi ?	wldtm	02/12/13 04:48 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To