I am running a set of 440 source h beam rods with arp2000 bolts in my .055" over 440. 7200 shift and stripe. They have been 7600 before when first changing to alcohol. 749 grams which at the time was over a 120ish grams lighter then the manleys and eagles weren't much different than that. Had them checked when new. They were a little on the tight side. Been in one engine that I had too much timing in and cracked the block due to detonation and all but one was fine after that. Resized and back in new block. Been running since 2009 with limited scheduled/finances with a couple hundred passes. Been very happy so far with budget in mind for the racing I get to do.

Let the 440 source haters have at it.
Beep