Quote:

Quote:

I can say for fact that the higher the RPM I leave
at the quicker the 60'... I have a 5600 stall and I
leave at 5600... no chip... that gives me a 1.19 60'
I would like to go to a 6000 conv and start upping
the revs to see if that gives me a better 60'....
its all what your chassis can take... why have your
torque at 5000+ rpm and leave at 3000......JMO
I know alot of guys that the chassis cant do it but
they also dont like doing chassis work and just leave
it alone




I'm the same as Mr.P ...well atleast after I put the anti-roll in. Up until the new BGR mill I always left on the wood with a 5800 stall...



Same here. Put a brake in towards the end of the season and started out with the chip at 3000 and kept working up. Was up to 4200 at the end of the season and had the best 60's ever. Converter stalls at 5400 , so I can still try going higher on the 2 step. But it going to have to wait for a few months before I can try it .